A strip of LEDs from a lighting fixture.

Energy efficient. Long lifespan. 

There sure are a lot of exciting promises surrounding LED lights for home these days.

And a lot of buzzwords, too. Heard about lumens and color temperature?

In the following paragraphs we'll break the subject down for you. You'll learn how LED is different from any lighting source you've purchased in the past, and read some helpful tips to keep in mind when shopping.

A close up of an LED light bulb with red and blue light.

A Short History of LED Lighting

First, a little background on the technology.

The birth of the LED goes back as far as the early years of the 20th century, when electroluminescence was discovered by British scientist H. J. Round. 

Today's LED lighting uses a small semiconductor chip rather than a filament in a bulb to produce light.

These chips are small and compact, and can be programmed to output any color of light imaginable. This means that you can have a single bulb controlled by a remote or a phone app that's capable of outputting white light, red light, or any other color.

LED light bulbs for home are available as replacement bulbs for almost all types of bulb bases and shapes. LEDs also come built into desk lamps, chandeliers, pendants and other lighting fixtures as a dedicated array, so there are no bulbs to replace.

All in all, LED is a very adaptable technology that can be used in a wide range of applications.

Energy Efficiency and LEDs

Of course, the first thing most of us think about is the fact that LEDs use far less energy than other light sources. 

Indeed, LEDs are the greenest option on the market today. 

In the past, people estimated the brightness of a bulb by its wattage. But LEDs use much less electricity so the old wattage measurement no longer applies. So now we use "lumens" instead to measure brightness.

Watts Needed to Produce Lumens Chart

In the chart above, notice the difference in wattage required to produce 1,100 lumens. Per watt used, LEDs produce many more lumens (or light) than either incandescent bulbs or CFLs (compact fluorescent bulbs). 

Buying Tip: What does all this mean for you? For one, you should be looking at LED bulbs or fixtures to see how many lumens they produce, not how many watts they use; the more lumens, the more light. 

As seen in the chart below, an LED using only 6 to 8 watts of energy outputs light comparable to a 40 watt incandescent or a 9 to 13 watt CFL.

LED vs Other Bulbs Types

LED Lifespan

LEDs last a very long time, anywhere from 10-20 years on average under optimal conditions.

This eliminates the need to constantly buy and change new bulbs, and reduces the load on landfills.

Buying Tip: Replace hard to reach incandescent bulbs (like those on that hallway chandelier you have to use the step ladder to get at) with LEDs; they will last for years and will greatly decrease the number of times you need to replace the bulbs (and climb that ladder).

Bulb and LED Lifespan

LED Color Temperature Explained

LED lighting offers a range of color tones, from the soft look of an incandescent bulb to the bright blue look of daylight.

These color tones are called "color temperature" and their measurement is made in degrees Kelvin (K). Look at the wide range of color temperatures that LED produces:

LEDs and Color Temperatures Chart

Buying Tip: If you want a warm, incandescent-like light from your new LEDs, choose a bulb or an LED fixture with integrated LEDs that has a low color temperature, one below 2900K. 

Dimmers and LEDs

You can use dimmers on most LED bulbs and lighting designs, unless the manufacturer states otherwise. However, because LEDs are a semiconductor circuit chip, they are not always compatible with traditional dimming switches.

The reason for this is that traditional dimmers that are made to work with incandescents by decreasing the amount of electrical current sent to the bulb. The less electricity, the dimmer the light. As we have seen however, there is no direct correlation between LED brightness and the amount of energy used. To dim an LED, you'll need an LED compatible dimmer.

If LEDs are so energy efficient, why dim them in the first place? For starters, dimming any room light enhances the ambiance and mood of the space, making the room a more enjoyable area to be in.

Dimming LEDs saves energy too. Dimming them to 50% of their light output saves nearly 50% on energy. Plus, dimming an LED makes them run cooler, which extends the life of the bulb or integrated LED array.

Buying Tip: Make sure your wall dimmer is LED compatible, and replace it if it is not.

A free form chandelier that uses LEDs.

New Forms and Shapes

Because LEDs are so small and compact, they can be grouped and used in a variety of novel new shapes.

In part this is because LEDs are not dependent on the old-fashioned Edison and incandescent bulb shapes. LEDs can, in fact, be arranged into almost any imaginable shape, from long lamp arms to round chandelier pendants. 

This aspect of the LED enables a whole new range of lighting designs.

Buying Tip: If you like modern lighting, the LED is a natural, as there are more eye-catching designs on the market than ever before. However, if your tastes run more traditional, don't despair. There are plenty of traditional LED designs, plus new bulbs to fit your old fixtures.

More To Explore

For more information about LEDs, check out the video below from our YouTube  channel, or click on an LED article below to read more. Questions? Call 1-800-782-1967 or visit one of our lighting stores to speak to a training lighting associate.

1. How an LED Light Bulb Works

2. Light Bulb Types

3. Light Bulb Finder Page

4. Lumens - the Key to Buying New Bulbs