Energy efficient, this ceiling fan features a brushed nickel motor, five medium maple/dark walnut blades, and an integrated LED light.More Details >
This stylish ceiling ceiling fan is full of cohesive contemporary appeal. Five reversible medium maple/dark walnut blades are paired with a brushed nickel finish motor and an integrated etched lens light with a dimmable, LED design. Includes a hand-held aire control remote system and a lifetime motor warranty. From the DYNO Collection by Minka Aire fans.(UM)
|Energy Information (at high speed)|
Cubic Feet Per Minute Per Watt
36" to 48" ceiling fans have airflow efficiencies ranging from approximately 71 to 86 cubic feet per minute per watt at high speed.
49" to 60" ceiling fans have airflow efficiencies ranging from approximately 51 to 176 cubic feet per minute per watt at high speed.
Money-Saving Tip: Turn off fan when leaving room
|Category||Features (Mouseover the underlined feature to review its benefits)|
Allows Control of Air Movement: High, Medium, Low
|Fan Name||52" Minka Aire DYNO Brushed Nickel Ceiling Fan|
|Finish||Brushed Steel/Brushed Nickel|
Suited to Large Rooms Over 12'
|Blade Type||Reversible Blades|
|Reverse Air Flow||
Save Energy in the Summer & Winter:
When Fan is Off, Flip Blade Direction Switch on Side of Switch Assembly (Location Varies by Model) to Change Seasonal Direction of Blades.
Keep Cool Air Down in Summer With Counter Clockwise Air Flow during Winter, Operate Fan in Clockwise Direction to Keep Warm Air from Rising
Great Value for Customer.
Creates a Designer Look
MFG. Limited Lifetime Motor Warranty + 1Yr Component Parts
Assurance of Quality Product
|Control Included||50048 NEW 08 REMOTE CONTROL|
|Optional Controls||50143 NEW 08 WALL CONTROL|
Customers most agreed on the following attributes:
I use this fan for added coolness in my family room,.
Since LED lighting is not a 'warm' light, it takes a bit to get used to. Installation easy except for the remote receiver. The bracket where it slides into is extremely narrow. Since the wires need to be tucked up into the space above the receiver to be in compliance with code, it is almost impossible to slide the receiver in place. If the bracket could be made a little bit wider, installation would be a breeze. Would be nice if there was a cover to place over the mechanism if using the smaller 3" rod. The cover provided can only be used for the 6" or longer rod. Lastly, the holder for the receiver has a narrow piece that covers the screw holes. It is so tight that the only way to slide the cover off is to take a very narrow screw driver and start the slide process. After approx 1/4 - 1/2 inch, the hole cover can then be easily slid off.
Fan and light works well.
Very quite fan and it moves lot of air in a large area. Bright & adjustable LED light and I usually run it around 75%. No need for any table lamps in the area. The fan remembers the last light setting and comes up at that level. Very good feature
Had to order twice. The first one had a similar problem as an earlier reviewer. The top half of the metal cap that covers the motor fit so crookedly that the blades could not turn. I returned it. Next one fit together correctly but the light does not work even though installed by a professional electrician. Kept it as I don't use the fan for lighting but it would have been nice if it worked since I paid for it. Nice fan but very disappointed in quality control. Neither box had any damage to it so there is obviously a problem in the factory. Had to pay the electrician for two visits so a moderately priced fan turned out to be very expensive. Disappointing experience overall. If you order this fan, cross your fingers.
The only installation issue I ran into was the sheet metal above the motor was slightly out of alignment and caused the blade assembly to rub on it as it spinned. I was able to bend it back into alignment quite easily. The box was in perfect condition so I have no idea how this happened.
This is a beautiful fan that is whisper quiet. The design is right in line with our aesthetic and it blends smoothly in with our decor. The only drawback is that we need to have it mounted with the shorter rod. We didn't realize but the cover that goes on top of the fan to hide the mechanics of it all can only be used with the longer down rod, so everything is pretty much exposed. In terms of visuals, it's not the best look, but as it is fairly close to the ceiling, you don't notice it much, but dusting and cleaning it is a whole other story. I wish we could use a cover and the short down rod, but we are stuck with it uncovered. It is a small price to pay given the other pros of the fan. Overall, we are very pleased with the functionality and look.
Great Fan, Adjustable LED using included Remote. Very Bright for such a small LED, I usually run it at about 80% of full brightness.