Brushed steel finish cord cover adds a great touch to swing arm wall lamps.
Brushed steel metal cord cover adds an elegant finishing touch to your new lighting. Two piece design.
Customers most agreed on the following attributes:
Purchased this to illuminate our corner desk and it works great. just find a place for it on the wall and there is no need for a lamp on the desk or a floor lamp. This is a solid, heavy piece. Blows away anything at the Big Box Store.
easy to install and makes the wall lamp look more 'finished'
easy to install and just adds a finished touch to the wall lamp
The wall anchors included did not work out. I had to use my own wall anchors because the ones included came right out of the wall... Cheap! Happily, the final appearance is nice.
[...] installed easily. The only issue was with the shades (slight damage) but LampsPlus is replacing. We used in our master bedroom instead of table lamps - and they look great mounted on the wall on either side of the bed. Plus, the 75Watt bulb is bright enough to allow reading in bed. Highly recommend - especially for the price.
was not happy about drilling the holes for brackets however I used 3M two face tape to affix bracket to the wall with much success.
Used 4 of these to cover cords from swag lamps in our living room. They look fantastic and go very well with our decor.
I used two of these cord hiders to mask the cords from two wall sconces I bought at another lighting store. They look expensive (I'm very picky about finishes looking cheapo...but this brushed nickel is really nice looking.) They were also easy to install. My only complaint is that there is no way to add an extra piece to make them longer. I could have used an extra 7 or so inches.
This item puts the finishing touches on wall lamps and hides the cords. GREAT LOOK!
To hide cords running from wall sconses to electric outlet.
Arrived propmtly & in perfect condition.
Very easy to install and hide the electric cord. Adds to the look of the lamp.
the cord cover color and finish matched the swing arm lamp but it was not a smooth fit to wall or to the lamp . There's a gap between the lamp base and the start of the cord cover. 30'' was not long enough, needed another six inches from end of cover to bottom of wall. Even with these cons, still looks better than having bare cord running down wall from lamp to plug.
When a wall lamp will show its cord, this product looks like part of the lamp and covers it beautifully.
Hides lamp cord
This is really made to hold just one cord, although I squeezed two in when I used it with my flatscreen TV. Be careful during installation as the edges of the under channel are sharp. Also note that this works best if the visible cord is going from the fixture down behind a piece of furniture because it will have to stick out at the end.
Coordinates well with lamp whose cord is well hidden.
This cord cover is a nice, clean finishing touch. It neatens everything up.
Our associates are standing by to assist you.