6" Recessed 11-W Dimmable LED Retrofit Light Trim in White

From Juno Lighting comes this line voltage new construction recessed light housing. This housing features deep lamp shielding for maximum brightness. Designed for use in non-insulated areas. If installed where insulation is present, the insulation must be pulled back 3" from all sides of the housing. To be used with Juno Lighting recessed light trim. 7 3/4" wide. 7 1/2" high. 13" long. 6 7/8" ceiling cutout.
View more details

Part of the economy line from Juno Lighting, this line voltage recessed light housing Juno Lighting offers the great performance features of the standard line. It has a single wall new construction non-perforated aluminum housing and is air-loc ready. May be covered with insulation. 7 1/8" high. 7 3/4" wide. 13" long. 6 7/8 ceiling cutout.
View more details

From Juno Lighting comes this line voltage IC remodeling recessed light housing. The housing features an air-loc ready non-perforated aluminum housing. This light housing may be covered with insulation. 7 1/4" wide. 7 1/8" high. 6 7/8" ceiling cutout.
View more details

Recessed housing for remodel application where back side of ceiling is not accessible. Installed through an opening in the ceiling from below. Design for use in non-insulated areas. If installed where insulation is present, the insulation must be pulled back 3" from all sides of the housing. To be used with Juno Lighting recessed light trim. 7 5/16" wide. 7 1/4" high. 13 3/4" long. 6 3/4" ceiling cutout.
View more details

This 6" LED recessed housing is rated IC or non-IC and is for use in new construction applications only. Approved for all ceiling and wiring types, and for direct burial in insulation. Galvanized bar hangers expand up to 24" and feature stepped-shank nail and positioning guide with integral T-bar locks and 2 locking screws to hold fixture into position. Expandable hangers allow off-center mounting in wood joist or T-bar ceilings. Maximum width 25 1/2", minimum width 13 1/4", or cut to fit 9" on center joist construction. Quick disconnect provided for power connection to the LED module. Vertical housing adjustment allows for flush-mounting with ceiling face; suitable for ceilings up to 1 1/2" thick. Compatible with Lithonia Lighting recessed light products. 5" LED IC/non-IC recessed light housing for new construction applications. Air-tight aluminum housing with galvanized steel pan. Galvanized bar hangers span up to 24". Ground wire included. 120
View more details

This dedicated6" LED recessed housing is rated IC or non-IC and is for use in remodel construction applications only. Approved for factory-assembled wiring only, and for direct burial in insulation. Aluminum housing construction and three remodel clips allow installation in existing plaster, sheet rock or mechanical ceilings. Includes ground wire and a removable J-box door for easy access. Quick disconnect provided for power connection to the LED module. Clip adjustment on housing (up to 1 1/4") allows for flush-mounting with ceiling face. UL-listed and rated for wet location; Title 24-compliant. Compatible with Lithonia Lighting recessed light products. 6" LED IC/non-IC recessed light housing for remodel construction only. Air tight aluminum housing construction with 3 remodel clips included. Heavy-gauge galvanized steel raceway arm. Ground wire and removable J-box door provided. 120 volt only. 2" x 8" existing ceiling or T-bar ceiling panel installation. Clip
View more details