- Photos
Basics & Gemini 1.75"H x 12"W -Light 24V DC Remote in Black
Return Policy
We stand behind the products we sell with a 60 day return policy. The process is easy, just contact us to receive an authorization number. Certain restrictions apply. You can read our complete policy in our help section.
- Fully enclosed remote power supply with knockouts & clips for line voltage wiring-Soft start, short & overload circuit protection features-For use with WAC Lighting Basics & Gemini Tape Light systems.
- 1W minimum load supports low-load LED systems. Intrinsically safe Class 2 transformers draw no more than 5 amps. Includes a 72in lead for Basics & Gemini; longer leads (T24-BS-EX2) sold separately.
- Secondary wiring for Class 2 transformers needs no conduit, sheathing or clamps. Suggested low-voltage wire (sold separately): 14-18 gauge, stranded or solid. Non-metallic sheathed cable OK in walls.
- Input Voltage: 120-277VAC, Output Voltage: 24VDC-Available in 60W, 96W, and 3x96W options.
- Smooth and continuous dimming with 0-10V,ELV, and TRIAC dimmers-Dimmers should always be installed on the primary side of the transformer.
This class 2, UL & cUL listed enclosed electronic transformer is used to power Gemini Tape Light by WAC Lighting. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. Transformer has knockouts with clips for line voltage wiring. Secondary low voltage wiring for class 2 transformers do not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. May be dimmed using an electronic low voltage dimmer. Includes a 72in lead wire for Gemini, longer lead wires (T24-BS-EX2) are sold separately.